Highlight Formatting for Solid Guage Chart
Before you walk through the below guide to set
the Highlight on Solid Guage chart, you can refer Highlight
for getting more details of the Highlight option to set the conditional
formatting on the chart.
For Solid Guage chart, to set the Conditional
Formatting the Highlight formatter is available in the formatter section.
By default, the Highlight formatting options are not visible. Turn the Apply toggle
button ON (
)
to format the data color, as per the satisfied condition.
Solid Guage chart plotted as below with with Value configuration. You can plot
with any valid configuration with or without other available configurations of –
Minimum, Maximum, Target. The figure given below shows the plotted Solid Guage
chart.
Figure
1: Solid Guage chart
To apply conditional formatting, refer Highlight
and follow the steps as mentioned.
For highlight, while setting conditions we use
below applicable conditions:
Figure
2: Highlight modal of Solid Guage chart
After applying the Highlight
configuration, the chart is displayed as below:
Figure
3: Highlighted Solid Guage chart
The chart data color changes
are overwritten and chart data color is set to Orange because first condition
added in Highlight modal is satisfied (The value 32.52Thousands is less than
40000, which sets orange color). Topmost satisfied condition is considered for
setting the changes on the chart.
Update/Removal of added conditions on the highlight
configuration is allowed.
To update the Highlight – Formatters >> Click
Highlight >> Click Edit Formatting >> Change/Update the conditions
>> Apply.
Figure
4: Edit Formatting option to Update Highlight
To remove the Highlight >> Set Apply toggle
button to OFF.
To configure solid guage chart with Plot Band to
set the different data ranges and set the highlight as per those ranges, refer Configuring
Plot Bands in Solid Guage Chart.
|
Notes: |
|